MarkBass Little Mark Tube

578,00 € *
Verkaufseinheit: 1 Stück

inkl. MwSt. inkl. Versandkosten

Artikel versandbereit.

Finanzierung möglich
  • 259039

Ansprechpartner

Unser Fachmann:
Bild von Patrick Höss Patrick Höss
0711 51098019

Bild von Bernd Grünen Bernd Grünen
0711 51098013 | E-Mail

Herstellertext von MarkBass Little Mark Tube: Neben dem Standard Transistor-Preamp der Little... mehr
Produktinformationen "MarkBass Little Mark Tube"
  • 500 Watt/4Ohm
  • Röhre&analog Preamp
  • VLE & VPF Filter
  • FX Pre/Post schaltbar
  • Line Out regelbar (XLR symmetrisch)
Herstellertext von MarkBass Little Mark Tube:

Neben dem Standard Transistor-Preamp der Little Mark-Amps bietet dieser Verstärker einen Röhren-Vorverstärker, der alternativ oder kombiniert betrieben werden kann! Beide Preamps verfügen über eigenen GainRegler, der Röhrenpreamp sogar über eine XLR Eingangsbuchse auf die 48Volt Phantomspeisung geschaltet werden können! Weitere neue Features sind der frontseitig regelbare DI Ausgang und eine Stummschaltung (Mute).  

INPUT 1
impedance 500 Kohm, max. voltage 15 Vpp
INPUT 2 (Balanced XLR/1/4" combo)
balanced, impedance 500 Kohm, max. voltage 15 Vpp, phantom power 48V
EFFECT RETURN
impedance 33 Kohm, max. voltage 10 Vpp

CONTROLS

GAIN 1
-60 dB to +23 dB range
GAIN 2
-60 dB to +23 dB range
MIX
mixes tube and solid state gain
MASTER VOLUME
LINE OUT LEVEL
GROUND LIFT
switch on rear panel
PRE/POST EQ
switch on rear panel
MUTE
push/pull on gain knob

EQUALIZATION

LOW
center frequency: 60 Hz; level: ±16 dB
LOW MID
center frequency: 360 Hz, level: ±16 dB
HIGH MID
center frequency: 800 Hz, level: ±16 dB
HIGH
center frequency: 5 kHz, level: ±16 dB
VPF (Variable Pre-shape Filter)
center frequency 380 Hz (cut)
VLE (Vintage Loudspeaker Emulator)
frequency range 250 Hz-20 kHz (cut)

OUTPUT

LINE OUT
balanced XLR, max. voltage 20 Vpp
EFFECT SEND
unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 2 Vpp
SPEAKER OUT
speakon/1/4" combo, 1/4"

OTHER

WEIGHT
6.55 lbs / 2.97 kg
DEPTH
10.1 in. / 25.6 cm
WIDTH
10.87 in. / 27.6 cm
HEIGHT
2.8 in. / 7.1 cm
OUTPUT POWER
300W RMS @ 8 ohm, 500W RMS @ 4 ohm
POWER REQUIREMENT
100/120V; 230V; 240V
50/60Hz
(Voltage is factory preset according to region of sale)
 
Notes:
Markbass amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country’s voltage.
Due to homologation issues, the voltage may not be changed.

Rack ears do not come included with this head.

About the Amps
The new generation of Markbass amplifiers is truly innovative, and represents a new stage in the evolution of bass amplification. Our custom-designed digital power supply circuitry allows for impeccable bass frequency reproduction, and our incredible-sounding digital power amps (used in the SD800 head) take advantage of cutting-edge technology. All of our new heads give you a wide variety of sounds and unsurpassed tone in an extremely lightweight package. These days many manufacturers are claiming to make light amps... but Markbass stands in a league of its own. Our Little Mark II 500W head weighs under 6 pounds!

  • All amps use top-quality dual-sided fibreglass PC boards with lined perforations for high-quality solder connections;
  • All large surface-mount components are silicon-sealed to isolate vibrations;
  • Computer-grade pre-assembled ribbon connector cable harnesses and ribbons for noise-free operation;
  • Integrated threaded posts for easy assembly/disassembly and added durability;
  • Rigid 2 mm thick aluminium chassis for a long-lasting finish;
  • All new Markbass amplifiers feature our special filters: the VLE (Vintage Loudspeaker Emulator) and the VPF (Variable Preshape Filter) Defining qualities of Markbass heads: They're powerful, they produce huge tone, they're incredibly dynamic... and they're super light!
Zuletzt angesehen