EV Tour-X System 6 Bundle

TX1122 - 12“ two-way

Employing the same space-saving, 90 x 50 horn as the FM models and the incredibly low-distortion SMX2120 12“ woofer, the TX1122 will astound you with performance that blows away ordinary 15“, two-way loudspeakers.

• Designed for Club Sound, House of Worship, Pro Music, and other applications.
• DH3 1.25” (32 mm) diaphragm, 1” (25 mm)-exit pure titanium compression driver
• SMX2120 12” (305 mm) LF transducer with fully symmetric drive
• Advanced fourth-order crossover with HF protection
• 90° x 50° coverage pattern
• 97 dB sensitivity, 130 dB maximum SPL
• 500 W continuous, 2000 W peak power handling
• Pole mount for tripod Use
• Six 3/8” threaded points for suspension

Tour X embodies the same engineering excellence and aesthetic design found in every world-class EV tour system. Its form is seamlessly integrated into practical, functional elements that make a bold statement about the multi-application purpose and breakthrough performance. A host of innovative features and patent-pending designs make Tour X the most exciting portable loudspeaker series available.

Features:

• Designed for Club Sound, Pro Music, House of Worship, Concert Sound, and other applications.
• Distinctive “backbone“ grille design for superior strength
• 1.75“ DH3 and 2“ ND2 compression drivers
• SMX and EVS woofers
• Rotatable horns
• Ultra-sonically welded ergonomic handles
• Floor monitors incorporate the patent pending Signal Synchronized Transducers (SST) split baffle design
• Up to 36 dB per octave slope crossovers
• Integrated eyebolt suspension points
• No crossover required for single woofer top & sub systems

Specifications:

• Color    Black
• Input Connections    Parallel Neutrik®® NL4
• Speaker Type    Fullrange
• Frequency Response (-3 dB)    60 - 20000 Hz
• Frequency Response (-10 dB)    45 - 20000 Hz
• Internal Crossover    Yes
• Recommended High-Pass Frequency    45 Hz
• Sensitivity 1 W/1 m    97 dB
• Max. SPL/1m (calc)    130 dB
• Coverage (Nominal -6 dB) H°    90 °
• Coverage (Nominal -6 dB) V°    50 °
• Rotatable Horn    No
• System Power Handling (Continuous/Program/Peak)    500 Watts
• LF Transducer    SMX2120
• HF Transducer    DH3
• Crossover Frequency    1750 Hz
• Nominal Impedance (Passive)    8 Ω
• Minimum Impedance    5.4 Ω
• Enclosure Material    Plywood and MDF with EVCOAT
• Flying    Yes
• Suspension    (6) 3/8-inch threaded inserts
• Height    616 mm (24.25")
• Width    382 mm (15.04")
• Depth    380 mm (14.96")
• Weight Net    20.2 kg (44.53 lbs)

TX2181 - Dual 18“ subwoofer

An ideal companion sub to the TX2152 in a two-to-one sub top ratio, the TX2181 makes excellent use of its dual EVS18S woofers to provide the low end necessary for a truly high-end, professional rig.

Features:

• Designed for Club Sound, House of Worship, Pro Music, and other applications.
• Dual EVS-18S 18” (457 mm) LF transducers
• 103 dB sensitivity, 138 dB maximum SPL
• 1000 W continuous, 4000 W peak power handling
• Four integrated handles for easy portability
• Mounting points to attach optional TX-W1 wheel kit

Specifications:

• Color    Black
• Input Connections    Parallel Neutrik®® NL4
• Speaker Type    Subs
• Frequency Response (-3 dB)    50 - 160 Hz
• Frequency Response (-10 dB)    40 - 1500 Hz
• Internal Crossover    No
• Recommended Low-Pass Frequency    80 - 120 Hz
• Sensitivity 1 W/1 m    103 dB
• Max. SPL/1m (calc)    138 dB
• System Power Handling (Continuous/Program/Peak)    1000 Watts
• LF Transducer    (2) EVS18S
• Nominal Impedance (Passive)    4 Ω
• Minimum Impedance    2.9 Ω
• Enclosure Material    Plywood and MDF with EVCOAT
• Flying    No
• Height    1154 mm (45.43")
• Width    508 mm (20")
• Depth    691 mm (27.2")
• Weight Net    56.1 kg (123.68 lbs)

Tour X embodies the same engineering excellence and aesthetic design found in every world-class EV tour system. Its form is seamlessly integrated into practical, functional elements that make a bold statement about the multi-application purpose and breakthrough performance. A host of innovative features and patent-pending designs make Tour X the most exciting portable loudspeaker series available.

Features:

• Designed for Pro Music, House of Worship, Club Sound, Concert Sound, and other applications.
• Distinctive “backbone“ grille design for superior strength
• 1.75“ DH3 and 2“ ND2 compression drivers
• SMX and EVS woofers
• Rotatable horns
• Ultra-sonically welded ergonomic handles
• Floor monitors incorporate the patent pending Signal Synchronized Transducers (SST) split baffle design
• Up to 36 dB per octave slope crossovers
• Integrated eyebolt suspension points
• No crossover required for single woofer top & sub systems

Q1212
Electro-Voice Q Series Power Amplifier

With 2 x 1200 W @ 4 Ohms and 2 x 1800 W @ 2 Ohms, the Q1212 offers the horsepower to challenge the legendary P3000. It provides the same power from a 2 RU chassis at modest weight, making it a perfect subwoofer or high-power top drive for Phoenix, Tour X and Zx3/Zx5 systems or system combinations.

Features:

• Designed for Club Sound, Concert Sound, House of Worship, Performance & Sports Venues, Pro Music, and other applications.
• Up to 2 x 2400 W into 2 ohms
• XLR pass-though input connections
• The NL4 connection on output A also carries output B on pins +/- 2 to allow easy connection to bi-amped loudspeakers
• Switchable LPN filter extra tonal fundamentals and “kick” with a protective low-cut for 12” or 15” loudspeakers without additional subwoofers
• Class-H design
• Three-stage front-to-rear fans
• Complete protection package
• Classic EV amplifier dynamic headroom for real-world music and applications
• Built-in dynamic limiters

Specifications:

• Amplifier Gain    32 dB
• Continuous Rated Power (1 kHz, THD 1%) 2Ω    1800 Watts
• Continuous Rated Power (1 kHz, THD 1%) 4Ω    1200 Watts
• Continuous Rated Power (1 kHz, THD 1%) 8Ω    750 Watts
• Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω    1100 Watts
• Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω    550 Watts
• Cooling    Front-to-Rear, 3-stage fans
• DIM 30    0.05 %
• Electronics Type    Amplifier
• Frequency Response    10 Hz - 40 kHz
• Input Impedance (Balanced)    20 kΩ
• Input Sensitivity    +6.6 dBu
• Intermodulation Distortion (SMPTE)    0.1 %
• Mains Voltage    100 V, 120 V, 230 V or 240 V; 50-60 Hz (factory configured)
• Maximum Bridged Output 4Ω    3600 Watts
• Maximum Bridged Output 8Ω    2400 Watts
• Maximum Input Voltage    +21 dBu (8.69 Vrms)
• Network Control (IRIS-Net)    No
• Signal-to-Noise Ratio (A-weighted)    110 dB
• Slew Rate    30 V/µs
• Height    2RU 88.1 mm (3.47")
• Width    483 mm (19.02")
• Depth    421.5 mm (16.59")
• Weight Net    17.7 kg (39.02 lbs)

As direct descendants of the legendary P3000, Q Series amplifiers take Electro-Voice’s unique amplifier design to a new level. With Q Series efficient Class-H design, the permanent voltage rail is designed to cover the average music signal, rather than supplying the voltage for maximum output power. If dynamic peaks require a higher output voltage, the voltage rail is switched to the maximum. This process saves up to 50% of the power consumption found in conventional amplifier designs. Q Series combines sonic excellence all in a compact and affordable package.

Designed for:

• Concert Sound
• House of Worship
• Club Sound
• Pro Music
• Performance & Sports Venues
• Other Applications

DC-One

Two-in-six-out loudspeaker processor
 
Based on a two-in-six-out topology, the DC-One is designed primarily for users of small- to medium-sized sound systems in both mobile and installed applications. While the unit is an all-new development based on a powerful SHARC processor, it is 100% compatible with all settings from other Electro-Voice signal processors, including the Dx38—the best choice for achieving maximum performance with an EV loudspeaker system.
A large part of DC-One’s development was aimed towards ensuring users can easily and fully utilize its serious digital horsepower and high-end audio performance. Though free PC-Editor software is available, the DC-One can easily be operated via the front panel. Direct access buttons, six predefined configuration modes (one being free configuration), straightforward output delay settings, and true professional metering all allow for safe operation.
DC-One's unique "front-panel-access-control" allows the user to select a personal library of accessible presets (out of 60 factory and 20 user presets). In addition, the user can determine which individual parameters in each preset are locked (e.g. factory predefined output parameters) or editable (e.g. master EQ or delay settings).
The DC-One has a 1U 19-inch chassis that is deep enough to match typical amplifier depths, a front panel USB connector for the PC-Editor, and accepts either analogue or digital (AES-EBU) input signals; a 6-dB input pad is available. The RS232 on the rear also provides eight contact closures for preset changes, or allows two units to be linked for larger systems. The PC-Editor software, as well as firmware updates allowing additional functions, will be available on www.electrovoice.com.

Specifications:

• Analog Inputs     2 XLR (Electronically Balanced), 2 XLR THRU OUT (Electronically Balanced)
• Digital Inputs     1 XLR AES/EBU (2 Ch.)
• Analog Outputs     6 XLR (Electronically Balanced)
• Nominal Input Voltage     1.23V / +4dBu
• Maximum Input Voltage     8.7V / +21dBu (Without -6dB Analog Pad Engaged)
• Nominal Output Voltage     1.23V / +4dBu
• Maximum Output Voltage     8.7V / +21dBu
• Input Impedance (balanced)     10 kΩ
• Output Impedance (balanced)     50 Ohms
• A/D Conversion     24-Bit Delta-Sigma
• D/A Conversion     24-Bit Delta-Sigma
• Sample Rate     48 kHz
• Data Format     24-Bit
• Internal Processing     32-Bit Floating Point
• Frequency Response     10 Hz - 22 kHz (+/- 0.5 dB)
• Dynamic Range     111 dB (unweighted, band limited 22 Hz - 22 kHz)
• THD+N     < 0.01% (band limited 22 Hz - 22 kHz)
• Control Protocol     Front Panel USB Connector
• Mains Voltage     100-240 VAC
• Power Consumption     25W
• Electronics Type     Processor
• Weight Net    4.6 kg ( 10.14 lbs )
• Dimensions (HxWxD)    44.45 x 482.6 x 355.6 mm (1.75" x 19" x 14")